[讨论]YG12的性能如何？ [复制链接]

最近公司说打算买YG12的贴片机，不过我不太了解，想问一下，它属于哪种机器，是高速还是中速机？有几个头，多少个吸嘴？！价格怎么样？和YV100XG的比较怎么样？谢谢大家给意见！

看你贴什么样的元件，YG12适合贴小料，总的来说还可以

http://www.yamaha-motor.co.jp/global/industrial/smt/mounter/yg12/

Model YG12(Model : KJV-000)
Applicable PCB L510xW460 to L50xW50mm
Through-put (Optimum) 36,000CPH(0.1sec/CHIP equivalent)
Mounting accuracy (Yamaha's standard components) Absolute accuracy (µ+3σ) : +/-0.05mm/CHIP Repeatability(3σ): +/-0.03mm/CHIP
Applicable components 0402(Metric base) to □32*mm components (Note 1)
*Correspondence since Jan., 2010
Number of component types 60types(Max,8mm tape reel conversion)
Power supply 3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz
Air supply source 0.55MPa or more, in clean, dry states
External dimension
(Note 2) L1,254~W1,440~H1,450mm(cover top)
L1,464(End of extension conveyor)~W1,440~H1,450mm(cover top)
Weight Approx. 1,340kg
Note: With YG12, Buit-in type tape cuter, feeder carriage, FDD, etc, connot be used.
(Note 1) Except ball type electrode components.
(Note 2) This dimension does not include the projection.

http://www.yamaha-motor.co.jp/global/industrial/smt/mounter/yg12/

Model YG12(Model : KJV-000)
Applicable PCB L510xW460 to L50xW50mm
Through-put (Optimum) 36,000CPH(0.1sec/CHIP equivalent)
Mounting accuracy (Yamaha's standard components) Absolute accuracy (μ+3σ) : +/-0.05mm/CHIP Repeatability(3σ): +/-0.03mm/CHIP
Applicable components 0402(Metric base) to □32*mm components (Note 1)
*Correspondence since Jan., 2010
Number of component types 60types(Max,8mm tape reel conversion)
Power supply 3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz
Air supply source 0.55MPa or more, in clean, dry states
External dimension
(Note 2) L1,254~W1,440~H1,450mm(cover top)
L1,464(End of extension conveyor)~W1,440~H1,450mm(cover top)
Weight Approx. 1,340kg
Note: With YG12, Buit-in type tape cuter, feeder carriage, FDD, etc, connot be used.
(Note 1) Except ball type electrode components.
(Note 2) This dimension does not include the projection.
同上面的资料一样，打小料不错，打IC就没什么优势了，同YV100XG比，速度快很多，没有YV100XG打料的范围大，两种机器偏的重点不一样，请楼上的兄弟根据实际选择什么样的机器

学习了

从综合来说还可以，价格又不贵

谢谢大家给的意见！

还是100XG性价比高些。适用范围广。

贴小料就可以用YG12，打IC就没什么优势了

本人感觉100XG性价比高

18000个CHIP料每小时最多.比100XG打小料稳定,但100XG是多功能机.

只要是贴片机都有它自己优势，根据产品来定，有时候不是自己给老板意见就能定的，最终决定权在老板手上。以前我跟我的老板说买这种机器但最后还是他自己决定买了，买回来了我都不知道。

YG12的优势是做小料，速度快！加了直线相机，不用去识别相机哪里跑一趟了，还有改成了10连嘴。速度更快。直线相机采用线性马达和光学尺，精度高。Z轴也改了用的线性马达，这个可是YAMAHA的一大突破。改变了长久以来的气缸不能控制行程的历史。
其次YG12还有一款加长版的，把进口和出口轨道加长了。可专门用于生产LED日光灯。最长可生产1.2M的PCB

中速CHIIP贴片机,价格50万左右,保养方便,操作简单,理论贴装点是36K/H,实际一般为18K/H左右看PCB的点来决定

那么做异型元件方不方便？