[求助] 有关gerber 与*.art [复制链接]

客户传给我的GERBER是一个*.exe,打开后文件为*.art,不知如何打开。我用的软件是gc-place,我不知道*.art是怎么一回事？

HI,Friend:
  *.art is the gerber format,You can load it to gc-place,it is easy to do!
Can you have the FABmaster Software?

载入后data type 是select gerber or auto ?

Auto,然后倒入,看实际PCB尺寸是否与倒入的一致

johnny ----   thank you !
  moneyqian 我刚学gc-palace 的时你帮过我，不过中文手册我没收到。谢了！
Why 看实际PCB尺寸是否与导入的一致？
（题外话，客户传给我的gerber是另外一块板的gerber,这种事也有！）

我也在学gc-place，请问那里有中文说明书？:em02 :em02 :em02

Tecnomatix-unicam Company(shanghai office)!!!

1. load *.rpt 格式的cad档 后，Failed to merge unmatched
GC-PLACE   parts   . 可以導入﹐但全部無法merge.
我采用cad-xy的座標,但漏掉10多顆元件坐標。

2.在xpress cad Importer 的对话框的设定一样，同样Load *.rpt ,在TOP面看到的CAD-XY是正常的，而在bottom面 ,cad-xy只能显示框框及箭头，没有元件名称 .
我將bottom面及cad-xy鏡像翻轉﹐是?腸ad-xy中得出的坐標﹐不知道准不准﹐另外這種辦法漏掉了20多顆元件.

在漏掉元件坐標的位置對應的 *.rpt檔缺少框框及箭頭﹐有可能是因為*.rpt檔不完整。

Hi,Friend:
  For what you described? It is normal in Gc-place.
  If you think to import the CAD file,then reduced your operated time,it is a good way.But you must attend to the CAD file.If some parts missed in the cad file or the coordinate is not correct,then you will have the question you described after you loaded the cad file and merge the layer!

So you must check total the quanlity of part and the coordinate at first,Then you are easy to load the cad to gc-place,then merge the different layer,Good luck for you!

[QUOTE]最初由 W&M 发表
[B]我也在学gc-place，请问那里有中文说明书？:em02 :em02 :em02 [/B][/QUOTE]
我有GC-PLACE 的录像,有需要的朋友请和我联系,毕竟这是一个老软件. E-MAIL: CS_CHAN@263.COM