我用的是三星CP45FV的机子,今天在生产品时突然停止不动了.因为
生产到这里面气嘴要换了,但是它没有换掉,我就停止生产让机子归零.在把气嘴全放下时1号不能放下,其它可以而且软件中的1号气嘴的位置有显示但是实际上吸嘴还在1号头上.有下面的错误提示:
nozzle exist error
nozzle is present at head 1 failed to put
error occurred in tsksch while executing the sequences
move all head to align heigh
请各路大侠救我啊~~~~~~~~~~~~~