FABmaster,Valor,GC-Graphicode软件应用疑难门诊! EDA 技术交流 SMT之家论坛|SMT|Surface Mount Technology|表面贴装技术

SMT之家论坛 -> EDA 技术交流 -> FABmaster,Valor,GC-Graphicode软件应用疑难门诊!

登录 -> 注册 -> 回复主题 -> 发表主题

<< 1 2 3 >> Pages: ( 3 total )

lin_ymt	2006-03-20 21:53
需求帮助! 望那位大哥提供valor 7.5的帮助文件!这里谢谢先!

npier	2006-03-21 11:32
Hi Johnny, Using Fabmaset to output HP3070 Boards file.The format as below, CAPACITOR C011-1 100.000n 10 10 F PN"CAP0000057" ; C011-2 100.000n 10 10 F PN"CAP0000057" ; C011-3 100.000n 10 10 F PN"CAP0000057" ; Now, i only want to ouptut this format.how can i to do? CAPACITOR C011-1 100n 10 10 F PN"CAP0000057" ; C011-2 100n 10 10 F PN"CAP0000057" ; C011-3 100n 10 10 F PN"CAP0000057" ;

emouse	2006-03-21 14:22
Dear johnny: 我只有Valor的軟體,所以想學Valor 謝謝您了!!

johnny	2006-03-21 20:02
QUOTE: *引用第51楼npier于2006-03-21 11:32发表的“”*: Hi Johnny, Using Fabmaset to output HP3070 Boards file.The format as below, CAPACITOR C011-1 100.000n 10 10 F PN"CAP0000057" ; C011-2 100.000n 10 10 F PN"CAP0000057" ; ....... Dear Friend plz find the attachment! I have modified the cnf for hp3070 according to your needs! Johnny

johnny	2006-03-21 20:06
QUOTE: *引用第52楼emouse于2006-03-21 14:22发表的“”*: Dear johnny: 我只有Valor的軟體,所以想學Valor 謝謝您了!! Dear emouse if you have any questions about it,you can contact me in time,or send mail to my personal johnnyzzl@163.com good luck for you! Johnny

npier

2006-03-22 10:29

Dear Johnny,
Thanks for ur help.I'm too exciting.But i have a analogous problem.can you help me again?
If output format contains decimal fraction.how can i modify the config?
CAPACITOR
C011-1 100.050n 10 10 F PN"CAP0000057" ;
C011-2 100.000n 10 10 F PN"CAP0000057" ;
C011-3 100.020n 10 10 F PN"CAP0000057" ;
I want to output this format.
CAPACITOR
C011-1 100.05n 10 10 F PN"CAP0000057" ;
C011-2 100n 10 10 F PN"CAP0000057" ;
C011-3 100.02n 10 10 F PN"CAP0000057" ;

shiftbiz	2006-03-22 20:49
lin_ymt, 如你需要VPL 的话可以找我，可以给你打折，量多打折，谢谢。

johnny

2006-03-22 20:49

QUOTE:

引用第55楼npier于2006-03-22 10:29发表的“”:
Dear Johnny,
Thanks for ur help.I'm too exciting.But i have a analogous problem.can you help me again?
If output format contains decimal fraction.how can i modify the config?
CAPACITOR
C011-1 100.050n 10 10 F PN"CAP0000057" ;
.......

hi,npier
it only support for the same type(CAP OR RES),It cann't solve your special problem!
or you can send your contact informtion to me(johnnyzzl@163.com),I can explain you how to do it!

Good Luck for you!

Johnny

shiftbiz	2006-03-22 20:56
Dear Jonhhy, How are you? I'm an old friend of you from HMD. Is there any update about valor document model? I want to push it in our team, could you give us more help?

johnny	2006-03-22 21:04
QUOTE: *引用第58楼shiftbiz于2006-03-22 20:56发表的“”*: Dear Jonhhy, How are you? I'm an old friend of you from HMD. Is there any update about valor document model? I want to push it in our team, could you give us more help? Dear shiftbiz Sorry that I can't remember you! Any problems you can send to my personal mail box! Johnny

johnny	2006-03-22 21:16
Hi,shiftbiz Nice meeting you again^-^ Johnny

emouse	2006-03-22 21:46
一些Valor 的問題請各位網友不吝解答,Thanks. 1.如何踢除Valor Clinet 的使用者 2.如何檢視同一時間有哪些使用這連上 Valor Server 3.274X 格式有辦法經由 Valor的哪些步驟後可輸出ODB++的格式 Thanks!!

johnny

2006-03-22 22:10

QUOTE:

引用第61楼emouse于2006-03-22 21:46发表的“”:
一些Valor 的問題請各位網友不吝解答,Thanks.
1.如何踢除Valor Clinet 的使用者
2.如何檢視同一時間有哪些使用這連上 Valor Server
3.274X 格式有辦法經由 Valor的哪些步驟後可輸出ODB++的格式
Thanks!!

Hi,Friend
1.如何踢除Valor Clinet 的使用者
one:set the different level for diff user;
two: don't share trilogy or enterprise folder to user;

2.如何檢視同一時間有哪些使用這連上 Valor Server
you can check FlexLM log file in logs folder;

3.274X 格式有辦法經由 Valor的哪些步驟後可輸出ODB++的格式
if you don't need Comp_top layer,you can input RS-274-X Gerber to valor system,then output ODB++,It is ok;
if you need comp_top or comp_bottom layer,you need convert the gerber via component extract package function!

Good luck for you!

Johnny

lin_ymt	2006-03-22 22:38
hi,johnny: how can Synchronization between Cadence Allegro and valor?

johnny	2006-03-22 23:46
QUOTE: *引用第63楼lin_ymt于2006-03-22 22:38发表的“”*: hi,johnny: how can Synchronization between Cadence Allegro and valor? dear lin_ymt 1.you must check the sync license! 2.you must set the parameters(auto,cadence,mil,over 12 version) in valor configulation! 3.you must create one quick key for linking the dofiles. Then that's ok! Johnny

lin_ymt	2006-03-23 13:11
dear,Johnny: thanks a lot!where are dofiles?can you send it to me! Good luck for you!

johnny	2006-03-23 15:05
hi,lin_ymt in .../share/dofiles/... I suggest you need get one system training of valor through the regular way! Good luck for you! Johnny

lin_ymt	2006-03-23 15:26
hi,johnny: MSM主要是干吗的？

zhenzhen	2006-03-23 15:54
QUOTE: *引用第56楼shiftbiz于2006-03-22 20:49发表的“”*: lin_ymt, 如你需要VPL 的话可以找我，可以给你打折，量多打折，谢谢。这是什么意思啊？难道VPL还可以卖吗？是指他的软件＆license，还是指VPL package？不明白！！

johnny	2006-03-23 20:39
QUOTE: *引用第67楼lin_ymt于2006-03-23 15:26发表的“”*: hi,johnny: MSM主要是干吗的？ hi,lin_ymt Msm: Machine Shape Manager,it is for smt programming! Johnny

emouse	2006-03-27 08:45
Dear Johnny: 請問一下,例如Valor report 12個Error 我要如何一次就加入到Sharelist 而不用一筆一筆加入,Thanks. emouse

lin_ymt	2006-03-27 09:21
楼上的兄弟：我也觉得一个一个的加入Sharelist，挺麻烦的！不知有没有一次导入Sharelist的方法？

johnny	2006-03-28 00:58
QUOTE: *引用第70楼emouse于2006-03-27 08:45发表的“”*: Dear Johnny: 請問一下,例如Valor report 12個Error 我要如何一次就加入到Sharelist 而不用一筆一筆加入,Thanks. emouse Dear emouse 1.No good solution for your question in valor system! 2.But you can develop one application for your question by perl script! Good Luck for you! Johnny

emouse	2006-03-28 08:40
Dear johnny: 謝謝您提供的方法,應該是說明書中的0204吧? Thanks. emouse

hyoree	2006-03-28 14:10
For the file fatf output from GC，I set the rule: Nail to nail definition “nail_min(0.060,2,3);” It’s no effect when fabmaster select. But it’s fit in check rule that can be changed to tool2 by hand. Thanks.

johnny

2006-03-28 17:36

QUOTE:

引用第74楼hyoree于2006-03-28 14:10发表的“Nail to nail definition?”:
For the file fatf output from GC，I set the rule:
Nail to nail definition “nail_min(0.060,2,3);”
It’s no effect when fabmaster select.
But it’s fit in check rule that can be changed to tool2 by hand.
Thanks.

Hi,Friend
nail rule is not correct!
plz send me ur FAZ to me,then I can check your problem!

Johnny

hyoree	2006-04-03 16:46
Everybody,我前些天开始使用gcp，觉得很不错，但觉得唯一不足就是定义元件名称时mouse要点来点去。请问是否有快捷键可以切换。感激不尽。

johnny	2006-04-03 19:37
QUOTE: *引用第76楼hyoree于2006-04-03 16:46发表的“About gcpowerstation question?”*: Everybody,我前些天开始使用gcp，觉得很不错，但觉得唯一不足就是定义元件名称时mouse要点来点去。请问是否有快捷键可以切换。感激不尽。 hi,Friend you can automatically Identify the name of parts! Good luck for you! Johnny

hyoree	2006-04-04 08:47
I sent my faz to you,please help me solve the problem. Thank you. Though I can automatically Identify the name of parts,but some names are far from the part, these will be blank and error,and I still need to define these names by hand. Thanks.

emouse	2006-04-04 08:48
關於Add all error into share list 的解法II , Dear Johnny & Lin_ymt 我找到另一個解決方法是用按鍵精靈幫我按加入Error into sharelist , 但是Johnny 說的才是正確的使用方式,因為學習Prel 需要多話時間,所以先用按鍵精靈頂著先,Thanks.

lin_ymt	2006-04-04 08:59
谢谢楼上提供的方法！要是哪位高手能够提供一个Scripts就好了！

johnny	2006-04-04 19:17
QUOTE: *引用第80楼lin_ymt于2006-04-04 08:59发表的“”*: 谢谢楼上提供的方法！要是哪位高手能够提供一个Scripts就好了！ Good way! if I have the license,Maybe I can write one script for test in my spare time! Johnny

lin_ymt	2006-04-04 19:53
hi, Johnny: have you simple script introduction?

johnny	2006-04-04 20:31
QUOTE: *引用第82楼lin_ymt于2006-04-04 19:53发表的“”*: hi, Johnny: have you simple script introduction? From Manual,I need license for test,do you have it,if ok,can send it to johnnyzzl@163.com,Thanks! Johnny

johnny	2006-04-05 23:19
QUOTE: *引用第80楼lin_ymt于2006-04-04 08:59发表的“”*: 谢谢楼上提供的方法！要是哪位高手能够提供一个Scripts就好了！ Hi,Lin_ymt I have sent the scripts to you for doing the test! Any feedback let me know in time! Johnny

hyoree	2006-04-06 13:55
Though I can automatically Identify the name of parts,but some names are far from the part, these will be blank and error,and I still need to define these names by hand.

johnny	2006-04-06 18:02
QUOTE: *引用第85楼hyoree于2006-04-06 13:55发表的“gcpowerstation define component”*: Though I can automatically Identify the name of parts,but some names are far from the part, these will be blank and error,and I still need to define these names by hand. Dear Hyoree It is right,you must define the remain name of part! No better way for ur question! Johnny

hyoree	2006-04-07 12:32
Can I choose the component by keyboard not mouse. up and down.

johnny	2006-04-07 20:08
QUOTE: *引用第87楼hyoree于2006-04-07 12:32发表的“”*: Can I choose the component by keyboard not mouse. up and down. Dear hyoree You can select all no REF Parts,Then use the "Q",you will continue to view each part by keyboard up and down! I think you need one system training for GC And Fabmaster! Johnny

hyoree	2006-04-08 22:08
I know gcplace define cmp by keyboard, The method you had told I knew in the past in gcplace. I only want to choose the cmp hit key(up) or (down) in gcpowerstation not in gcplace.

luo1443	2006-05-07 21:33
GC-PowerPlace 有輸出sony外挂程式嗎？

johnny	2006-05-14 21:22
no,it need develop.................

emouse	2006-05-18 21:48
請問johnny 有辦法Check M/B 中0402 Chip 的兩端Pad 間距是否大於15 mil , thanks!!

johnny	2006-05-22 22:50
Dear emouse it can be checked by discrete_gap or discrete_gap_max in padstack analysis! Good luck for you! Johnny

emouse	2006-05-24 16:17
Dear Johnny: 謝謝您提供的方法,Thanks!! emouse

ds-wang	2006-06-05 11:32
哇,楼主好厉害哦! 我正在学习中呀建议楼主多点教程过来,让大家共享! 先谢了!

kevinyeo	2006-06-14 23:00
Hahahahaha, Good Job ! Johnny. I don't know you can learn so much about Valor in your short time job. Of course FABmaster and GC-place also. Good Luck for you and everybody,too.

pcbtech	2006-06-14 23:46
华笙-Genesis V9 等介绍详见: http://www.maihui.net/book/testjpg.htm

mid_dynamo	2006-06-15 14:53
DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD

mid_dynamo

2006-06-15 14:56

我在使用allegro读入一个brd文件时提示：
Signoise errors/warning
WARNINGS:
Dielectric layer thickness is 0 !

输出板子的odb++时出来一个提示：
Valor: Extract out files
Loading signal.cxt
function valor_extract_info redefined
function odbGenFilmsParameters redefined
E- *Error* parseString: argument #1 should be either a string or a symbol (type template = "SS") - nil
然后就不能输出odb++文件了，请教各位大虾怎么解决啊？输出其它的板子都可以，就是这个板子不行，是不是这个板子的某些设置有问题啊？

查看完整版本: [-- FABmaster,Valor,GC-Graphicode软件应用疑难门诊! --] [-- top --]

Time 4.335526 second(s),query:3 Gzip enabled

You can contact us