[已解决]MX200  CompDBEidtor错误，重启无法解决 [复制链接]

MX200前几天编辑BGA元件数据并进行识别时发现下图错误。此时不能编辑任何元件数据。可以编写PCB程序
MTR数据为：-> [DBG] PC->M [4080]                                                          
-> [4080] Angle:0.000 Componenet Size(x,y,t)(1.600 0.800 0.700)                
-> [4080] Pickup Position(x,y,z)(0.000 0.000 0.000)                            
-> [DBG] Tbl:0 Head:06 Suction Level Empty(075), Exist(048)                    
-> [DBG] Tbl:0 Head:06 Offset  Level:027                                       
-> [DBG] exePartRecognition STEP1 Cam:02                                       
-> [DBG] PartRecognition Tbl:0 Hd:06 Pick:000 CAM03                            
-> <Vision> Vision Result Packet 5,-1,503,3                                    
-> <Vision> Result Error:503 [Cmd=5][Bd:0]                                     
-> <Vision> Err:22503 Capture Time:27[ms] Calculation Time:15[ms]              
-> [07/06-14:52:34]                                                            
-> [HelpMe] Request=9 ErrorType=20002 LampType=0                               
-> <Self Response> : V4082 I2 3 99                                             
-> [DBG] PC->M [4082]                                                          
-> [DBG] PC->M [1080]                                                          
-> <FeedChk> Start feeder information update... from(2)                        
-> <Initialize> Board 1 Feeder Exist Check OK !                                
-> <Initialize> Board 2 Feeder Exist Check OK !                                
-> <Initialize> Board 3 Feeder Exist Check OK !                                
-> <Initialize> Board 4 Feeder Exist Check OK !                                
-> <FeedChk> Elapsed Time = 570(ms)                                            
-> [DBG] PC->M [7000]                                                          
-> [DBG] PC->M [7400]                                                          
-> [DBG] PC->M [3220]                                                          
-> [DBG] PC->M [5050]                                                          
-> [DBG] PC->M [5050]                                                          
-> [DBG] PC->M [5020]                                                          
-> [DBG] PC->M [5050]       

当时机器模块温度33度

停止操作10分钟和重启后，可以编辑其它元件数据，可以识别，但是识别BGA元件时还是会出现这个问题。

请大家看看是什么原因，怎么出处理

从新拷贝一份ALPHA试一下

谢谢楼上的建议，当时就试过删掉BGA的DB数据，自已做的全部删掉了也没用。重启也只有BGA的出问题。
最后没物料，停了好几天了。就没有测试现在能不能用。

重新拷贝一份ALPHA，没有试过，下次做的时候不行再试吧。

未来公司的工程来过，换了一个旧版本的CompDBEidtor.exe文件，可以用了。